DECserver 700, 16 line, no Flash
DSRVW-ZC (Refurbished)
DECserver Specification
DECserver 700 Ethernet communications servers offer superior price/ performance over their predecessors. They provide the flexibility to adapt new network applications via software enhancements and customer-installable hardware upgrades. The DECserver 700 supports the following industry-standard networking protocols: Telnet, TN3270, PPP, SLIP, CSLIP, LAT, and SNMP. The DECserver 700 implementation of TCP/IP protocols (including Telnet, Serial Line Internet Protocol-SLIP, and Simple Network Management Protocol-SNMP) and LAT demonstrates Digital's commitment to "open" network protocols and to the delivery of information system solutions across any vendor's platforms.
The DECserver 700 comes in two versions: a 16-port limited modem control version and an 8-port full modem control version. The 16-port version uses RJ45/MJ8 connectors and supports most Hayes-compatible modems and Digital's DECmodem V.32 and Scholar Plus modems. Transmit (+) and Receive (+) signaling options are provided, as are the following control signals for low- to medium-speed (<9600-bit/s) asynchronous modems: Data Carrier Detect (DCD), Data Set Rate Selector (DSRS), Data Terminal Ready (DTR), and Ring Indicator (RI). Additionally, for medium- to high-speed (>9600-bit/s)asynchronous modems, the following control signals are supported: Clear-To-Send (CTS), Data Set Ready (DSR), Data Terminal Ready (DTR), and Request-To-Send (RTS).
The DECserver 700 SLIP and CSLIP implementation combined with the hardware platform's superior throughput and line speed makes the DECserver 700 an ideal, low-cost solution for local and remotely connected PCs. A single Ethernet address can support all 16 ports as IP addresses, eliminating the need for costly PC LAN implementations. PCs can access network resources and perform efficient file transfer and virtual terminal operations.
The DECserver 700 8-port version uses EIA-232/DB25 connectors and provides full modem control for modems that meet Bell 103, 212, and CCITT V.21, V.22, and V.32 specifications. This model is recommended for network connection of devices that require full EIA-232 signaling, such as industrial instrumentation.
Features
- Designed for rack, tabletop, or wall-mounting
- Superior performance-115.2 Kbits per second per port speeds, 250K characters per second aggregate throughput
- DECserver 700 (models DSRVW-EA, -GA) includes 4 Mbytes of memory and license for enhanced DECserver Network Access Software
- "Flash Ready" for future upgrade to Flash RAM option, allowing self-boot (no load host required)
- New user interface for customized menus and user-defined commands
- Kerberos security for user authentication
- Provides both 15-pin AUI and MJ8 UTP Ethernet ports
- Platform is expandable to 8 Mbytes of memory for future applications
The DECserver 700-16 is a 16-port RJ45 terminal server is configured with 4 MB of operational memory, an internal slot for a 2 MB Flash card using DNAS, DECserver Network Access Software. Flash card optional. USA power. DSRVW-GX DECsvr 700-16 (DSRVW-G*) DSRVW-GXN DECsvr 700-16 (DSRVW-G*)
***IN STOCK***
The DSRVW-ZA is part of the DECserver 700 family and is a high performance serial device and terminal server that provides 8, 25-pin D-sub (DB25) serial ports supporting full RS232 8-signal modem control. With AUI and 10BaseT Ethernet the DSRVW-ZA has connectors supporting up to eight sessions per port and speeds up to 115.2 Kbps per port. The DSRVW-EA has an internal FLASH socket for the optional Flash card, supports a self-booting operation. The DSRVW-EA runs DNAS (DECserver Network Access Software), which delivers multi-protocol network support. The DSRVW-ZA is designed for tabletop or rack mount configuration.
DECserver 700, 16 line, no Flash
DSRVW-YC (Refurbished)
DECserver Specification
DECserver 700 Ethernet communications servers offer superior price/ performance over their predecessors. They provide the flexibility to adapt new network applications via software enhancements and customer-installable hardware upgrades. The DECserver 700 supports the following industry-standard networking protocols: Telnet, TN3270, PPP, SLIP, CSLIP, LAT, and SNMP. The DECserver 700 implementation of TCP/IP protocols (including Telnet, Serial Line Internet Protocol-SLIP, and Simple Network Management Protocol-SNMP) and LAT demonstrates Digital’s commitment to "open" network protocols and to the delivery of information system solutions across any vendor’s platforms.
The DECserver 700 comes in two versions: a 16-port limited modem control version and an 8-port full modem control version. The 16-port version uses RJ45/MJ8 connectors and supports most Hayes-compatible modems and Digital’s DECmodem V.32 and Scholar Plus modems. Transmit (+) and Receive (+) signaling options are provided, as are the following control signals for low- to medium-speed (<9600-bit/s) asynchronous modems: Data Carrier Detect (DCD), Data Set Rate Selector (DSRS), Data Terminal Ready (DTR), and Ring Indicator (RI). Additionally, for medium- to high-speed (>9600-bit/s)asynchronous modems, the following control signals are supported: Clear-To-Send (CTS), Data Set Ready (DSR), Data Terminal Ready (DTR), and Request-To-Send (RTS).
The DECserver 700 SLIP and CSLIP implementation combined with the hardware platform’s superior throughput and line speed makes the DECserver 700 an ideal, low-cost solution for local and remotely connected PCs. A single Ethernet address can support all 16 ports as IP addresses, eliminating the need for costly PC LAN implementations. PCs can access network resources and perform efficient file transfer and virtual terminal operations.
The DECserver 700 8-port version uses EIA-232/DB25 connectors and provides full modem control for modems that meet Bell 103, 212, and CCITT V.21, V.22, and V.32 specifications. This model is recommended for network connection of devices that require full EIA-232 signaling, such as industrial instrumentation.
Features
- Designed for rack, tabletop, or wall-mounting
- Superior performance-115.2 Kbits per second per port speeds, 250K characters per second aggregate throughput
- DECserver 700 (models DSRVW-EA, -GA) includes 4 Mbytes of memory and license for enhanced DECserver Network Access Software
- "Flash Ready" for future upgrade to Flash RAM option, allowing self-boot (no load host required)
- New user interface for customized menus and user-defined commands
- Kerberos security for user authentication
- Provides both 15-pin AUI and MJ8 UTP Ethernet ports
- Platform is expandable to 8 Mbytes of memory for future applications
DECserver 700-08
**IN STOCK**
The original DECserver 700-08 (-A*, -B*) was replaced in 1993 with the –E* and –F* models. The original units ran DECserver 700 software and were configured with 1 MB of operational memory. The follow on units were configured with 4 MB of operational memory, an internal slot for a 2 MB
Flash card and ran DNAS (DECserver Network Access Software). The –E* and –F* were retired in 2002.
The DSRVW-EA is part of the DECserver 700 family and is a high performance serial device and terminal server that provides 8, 25-pin D-sub (DB25) serial ports supporting full RS232 8-signal modem control. With AUI and 10BaseT Ethernet the DSRVW-EA has connectors supporting up to eight sessions per port and speeds up to 115.2 Kbps per port. The DSRVW-EA has an internal FLASH socket for the optional Flash card, supports a self-booting operation. The DSRVW-EA runs DNAS (DECserver Network Access Software), which delivers multi-protocol network support. The DSRVW-EA is designed for tabletop or rack mount configuration.
The DECserver 700-16 is a 16-port RJ45 terminal server is configured with 4 MB of operational memory, an internal slot for a 2 MB Flash card using DNAS, DECserver Network Access Software. Flash card optional. USA power.
DECserver 700, 8 line, Not Flash Ready
DSRVW-YA
DECserver Specification
DECserver 700 Ethernet communications servers offer superior price/ performance over their predecessors. They provide the flexibility to adapt new network applications via software enhancements and customer-installable hardware upgrades. The DECserver 700 supports the following industry-standard networking protocols: Telnet, TN3270, PPP, SLIP, CSLIP, LAT, and SNMP. The DECserver 700 implementation of TCP/IP protocols (including Telnet, Serial Line Internet Protocol-SLIP, and Simple Network Management Protocol-SNMP) and LAT demonstrates Digital’s commitment to "open" network protocols and to the delivery of information system solutions across any vendor’s platforms.
The DECserver 700 comes in two versions: a 16-port limited modem control version and an 8-port full modem control version. The 16-port version uses RJ45/MJ8 connectors and supports most Hayes-compatible modems and Digital’s DECmodem V.32 and Scholar Plus modems. Transmit (+) and Receive (+) signaling options are provided, as are the following control signals for low- to medium-speed (<9600-bit/s) asynchronous modems: Data Carrier Detect (DCD), Data Set Rate Selector (DSRS), Data Terminal Ready (DTR), and Ring Indicator (RI). Additionally, for medium- to high-speed (>9600-bit/s)asynchronous modems, the following control signals are supported: Clear-To-Send (CTS), Data Set Ready (DSR), Data Terminal Ready (DTR), and Request-To-Send (RTS).
The DECserver 700 SLIP and CSLIP implementation combined with the hardware platform’s superior throughput and line speed makes the DECserver 700 an ideal, low-cost solution for local and remotely connected PCs. A single Ethernet address can support all 16 ports as IP addresses, eliminating the need for costly PC LAN implementations. PCs can access network resources and perform efficient file transfer and virtual terminal operations.
The DECserver 700 8-port version uses EIA-232/DB25 connectors and provides full modem control for modems that meet Bell 103, 212, and CCITT V.21, V.22, and V.32 specifications. This model is recommended for network connection of devices that require full EIA-232 signaling, such as industrial instrumentation.
Features
- Designed for rack, tabletop, or wall-mounting
- Superior performance-115.2 Kbits per second per port speeds, 250K characters per second aggregate throughput
- DECserver 700 (models DSRVW-EA, -GA) includes 4 Mbytes of memory and license for enhanced DECserver Network Access Software
- "Flash Ready" for future upgrade to Flash RAM option, allowing self-boot (no load host required)
- New user interface for customized menus and user-defined commands
- Kerberos security for user authentication
- Provides both 15-pin AUI and MJ8 UTP Ethernet ports
- Platform is expandable to 8 Mbytes of memory for future applications
DECserver 700-08
The original DECserver 700-08 (-A*, -B*) was replaced in 1993 with the –E* and –F* models. The original units ran DECserver 700 software and were configured with 1 MB of operational memory. The follow on units were configured with 4 MB of operational memory, an internal slot for a 2 MB Flash card and ran DNAS (DECserver Network Access Software). The –E* and –F* were retired in 2002.
DIGITAL TERMINAL SERVER 2MB
The DCSRV-PA is part of the DECserver 90M+ family and is an 8-port serial device, remote access and terminal server that connects terminals, printers, modems and serial devices over Ethernet LANs. The DCSRV-PA supports up to eight sessions per port and speeds up to 230.4 Kb/s per port. The DCSRV-PA ships with 8MB of internal RAM. 4MB of on-board FLASH RAM is provided with network load host options through a BootP server. Delivering multi-protocol network support, the DCSRV-PA runs DECserver Network Access Software (DNAS).
Refurbished DCSRV-M - DECserver 90M+, 8 x RJ 45, DEC-423 interface, RS-232 compatible serial device and terminal server. The DCSRV-PA is for modular use in the DEChub 90 or MultiSwitch 900 chassis.
The DECserver 90M is a full function asynchronous device and remote access server that provides eight low cost local or remote asynchronous MJ8 (RJ45) connections over 10BASE-T or ThinWire Ethernet LANs. The DECserver 90M supports up to eight session per port and speeds up to 56.2Kbps per port. The DECserver 90M runs DECserver Network Access Software (DNAS) which delivers multi-protocol support for TCP/IP, IPX, and AppleTalk networks.
DECrepeater 90TS
DECREPEATER 90TS 8 RJ45 PORTS
The DECrepeater 90TS provides eight RJ45 ports and one out of band (OBM) management port, and one ThinWire coaxial port.
Digital Equipment Corp / DEC DETMI-MA
DIGITAL NETWORKS DECSERVER 716 WITH FLASH CARD
Innovative Peripheral Systems, Inc.